Dehumidifier EvoDry 12H

Control the climate. Combat moisture and mould with EvoDry 12H

EvoDry 12H is an energy-efficient desiccant dehumidifier suitable for both temporary and permanent installations. EvoDry 12H comes equipped with an electronic hygrostat that allows you to select the desired moisture level. All the dehumidifiers in the EvoDry range are designed with energy efficiency in mind. This is why they are some of the most energy-efficient dehumidifiers on the market.

For use in, for example, storage spaces, warehouses, cellars or holiday cabins with a room volume of up to 200 m³.

Has a built-in electronic hygrostat, setting by graduated scale which is located by the intake filter. This control starts dehumidifying when the moisture level exceeds the set amount. Constant dehumidification is obtained by setting the dial to status ON. The dehumidifier’s fan is in operation as long as the plug is connected, only the dehumidification process is controlled by the hygrostat.

Unlike cooling or condensation dehumidifiers, desiccant dehumidifiers do not collect water in a container or a pipe, instead, the moisture goes away through an air stream. Acetec EvoDry 12H is a desiccant dehumidifier that transports the moisture via a natural gas pipe.

Usage areas: storage spaces, cellars, garages, decontamination, holiday cabins

Includes:

• Dehumidifier EvoDry 12H
• Natural gas pipe 1.5 m
• Pipe clamp x 2
• Outflow unit

What is the difference between dehumidifier EvoDry with control H or P?

EvoDry H

H stands for Hygrostat and is suitable for dehumidification and remediation. You can say that the H models are universal and are suitable for most different dehumidification applications.

EvoDry P

P stands for Panel and is suitable for dehumidification where you want an external monitoring of the climate and where the dehumidifier can alert if the climate is not good. For example, there may be creep bases and cold winds where you want extra control over the climate.

Features EvoDry 12H and 12P

	Process Air Humid air to be dehumidified. Wet Air Moisture-saturated weak air flow that removes moisture from the dehumidified space. Dry Air Dry and slightly heated air that spreads in the dehumidified space.
H - Hygrostat Has built-in electronic hygrostat, setting against graded scale is placed at intake filter. This control starts dehumidification when the moisture content exceeds the set value. Constant dehumidification is obtained by setting the knob to the ON position.	P - Panel More advanced control for increased security where everyone settings are made via the control panel. With this control you have full control of the moisture content and temperature where alarms are shown on the panel if the climate is unfavorable. Several setting options with energy saving mode and service reminder (filter change).
Fan operation - Via switches on the circuit board different operating modes of the dehumidifier fan can be set. The fan has three different operating modes: Constant operation of the process air fan. Fan stop when the moisture content is below the set value. Every 4 hours, the fan starts and runs for 15 minutes to check the moisture content. Fan stop when the moisture content is below the set value. Every 12 hours, the fan starts and runs for 3 minutes to check the moisture content.	FACTORY SETTINGS EVODRY 12P Language - Swedish  Maintenance/Service - 180 days  Humidity level - 60% Dehumidifier - RH (relative humidity)  Fan control unit - Always on  Starting delay - Off  Starting sequence - Off FACTORY SETTINGS EVODRY 12H Hygrostat (moisture content) - 60% Fan operation - Fan mode 1 EVODRY 12H & 12P HIGH/LOW The dehumidifier can be run in capacity mode high or low via switch.

Need help choosing dehumidifier?

Feel free to use our guide to choose the product that suits your needs. Or contact us for more information.