Dehumidifier EvoDry 12P

EvoDry 12P is a dehumidifier, of the type known as a sorption dehumidifier. It’s intended for dehumidification in cooler temperatures where a condensing dehumidifier cannot do its job.

20121

7350072461371

Description

Control the climate. Combat moisture and mould with EvoDry 12P

EvoDry 12P is a dehumidifier, of the type known as a desiccant dehumidifier. It’s intended for dehumidification in cooler temperatures where a condensing dehumidifier cannot do its job. EvoDry 12P works in all types of spaces where there is a need for dehumidification. You can easily choose settings and monitor the dehumidifier with the accompanying control panel. All the dehumidifiers in the EvoDry range are designed with energy efficiency in mind. This is why they are some of the most energy-efficient dehumidifiers on the market.

Use them, for example, in storage spaces, warehouses, cellars, holiday homes up to 200 m³ or crawl spaces and non-insulated attics with a room volume of up 100 m³.

Advanced control for increased security with all settings being made via the control panel. With this control you have complete control over the moisture level and the temperature with alarms that are shown on the panel if the climate is unfavourable. Several settings options with energy-saving status and service reminders (filter change).

Unlike cooling or condensation dehumidifiers, desiccant dehumidifiers do not collect water in a container or a pipe, instead, the moisture goes away through an air stream. Acetec EvoDry 12P is a desiccant dehumidifier that transports the moisture via a natural gas pipe.

Usage areas: storage spaces, cellars, garages, crawl spaces, non-insulated attics, decontamination, holiday cabins

Includes:

Dehumidifier EvoDry 12P
Control panel
Modular lead
Natural gas pipe 1.5m
Pipe clamp x2
Outflow unit

What is the difference between dehumidifier EvoDry with control H or P?

EvoDry H

H stands for Hygrostat and is suitable for dehumidification and remediation. You can say that the H models are universal and are suitable for most different dehumidification applications.

EvoDry P

P stands for Panel and is suitable for dehumidification where you want an external monitoring of the climate and where the dehumidifier can alert if the climate is not good. For example, there may be creep bases and cold winds where you want extra control over the climate.

Features EvoDry 12H and 12P

	Process Air Humid air to be dehumidified. Wet Air Moisture-saturated weak air flow that removes moisture from the dehumidified space. Dry Air Dry and slightly heated air that spreads in the dehumidified space.

H - Hygrostat Has built-in electronic hygrostat, setting against graded scale is placed at intake filter. This control starts dehumidification when the moisture content exceeds the set value. Constant dehumidification is obtained by setting the knob to the ON position.	P - Panel More advanced control for increased security where everyone settings are made via the control panel. With this control you have full control of the moisture content and temperature where alarms are shown on the panel if the climate is unfavorable. Several setting options with energy saving mode and service reminder (filter change).
Fan operation - Via switches on the circuit board different operating modes of the dehumidifier fan can be set. The fan has three different operating modes: Constant operation of the process air fan. Fan stop when the moisture content is below the set value. Every 4 hours, the fan starts and runs for 15 minutes to check the moisture content. Fan stop when the moisture content is below the set value. Every 12 hours, the fan starts and runs for 3 minutes to check the moisture content.	FACTORY SETTINGS EVODRY 12P Language - Swedish Maintenance/Service - 180 days Humidity level - 60% Dehumidifier - RH (relative humidity) Fan control unit - Always on Starting delay - Off Starting sequence - Off FACTORY SETTINGS EVODRY 12H Hygrostat (moisture content) - 60% Fan operation - Fan mode 1 EVODRY 12H & 12P HIGH/LOW The dehumidifier can be run in capacity mode high or low via switch.