Exl VAT Incl VAT

Dehumidifier EvoDry 18H

EvoDry 18H is a top quality, Swedish-made sorption dehumidifier. The dehumidifier is equipped with a hygrostat so you can set the desired moisture level easily.

20180

7350072461395

  • Total: 1

Replacement products

Dehumidifier EvoDry RCF 20 G1

19,995.00 SEK

Availability:

  • Total: 1

Energy-efficient desiccant dehumidifier with hygrostat

EvoDry 18H is a top quality, Swedish-made desiccant dehumidifier. The dehumidifier is equipped with a hygrostat so you can set the desired moisture level easily. EvoDry 18H is suitable for temporary as well as permanent installations. All the dehumidifiers in the EvoDry range are designed with energy efficiency in mind. This is why they are some of the most energy-efficient dehumidifiers on the market.

For use in, for example, storage spaces, warehouses, cellars or holiday cabins with a room volume of up to 300 m³.

Has a built-in electronic hygrostat, setting by graduated scale which is located by the intake filter. This control starts dehumidifying when the moisture level exceeds the set amount. Constant dehumidification is obtained by setting the dial to status ON. The dehumidifier’s fan is in operation as long as the plug is connected, only the dehumidification process is controlled by the hygrostat.

Unlike cooling or condensation dehumidifiers, sorption dehumidifiers do not collect water in a container or a pipe, instead, the moisture goes away through an air stream. Acetec EvoDry 18H is a desiccant dehumidifier that transports the moisture via a natural gas pipe.

Usage areas: storage spaces, cellars, garages, decontamination, holiday cabins

Includes:

  • Dehumidifier EvoDry 18H
  • Natural gas pipe 1.5m
  • Pipe clamp x2
  • Outflow unit

What is the difference between dehumidifier EvoDry with control H or P?

EvoDry H

H stands for Hygrostat and is suitable for dehumidification and remediation. You can say that the H models are universal and are suitable for most different dehumidification applications.

EvoDry P

P stands for Panel and is suitable for dehumidification where you want an external monitoring of the climate and where the dehumidifier can alert if the climate is not good. For example, there may be creep bases and cold winds where you want extra control over the climate.

Features EvoDry 18H and 18P

Process Air

Humid air to be dehumidified.

Wet Air

Moisture-saturated weak air flow that removes moisture from the dehumidified space.

Dry Air

Dry and slightly heated air that spreads in the dehumidified space.

H - Hygrostat

Has built-in electronic hygrostat, setting against graded scale is placed at intake filter. This control starts dehumidification when the moisture content exceeds the set value. Constant dehumidification is obtained by setting the knob to the ON position.

P - Panel

More advanced control for increased security where everyone settings are made via the control panel. With this control you have full control of the moisture content and temperature where alarms are shown on the panel if the climate is unfavorable. Several setting options with energy saving mode and service reminder (filter change).

 

 

 

 

Fan operation - Via switches on the circuit board different operating modes of the dehumidifier fan can be set.

The fan has three different operating modes:

  1. Constant operation of the process air fan.
  2. Fan stop when the moisture content is below the set value. Every 4 hours, the fan starts and runs for 15 minutes to check the moisture content.
  3. Fan stop when the moisture content is below the set value. Every 12 hours, the fan starts and runs for 3 minutes to check the moisture content.

FACTORY SETTINGS EVODRY 18P

Language - Swedish 
Maintenance/Service - 180 days 
Humidity level - 60% Dehumidifier - RH (relative humidity) 
Fan control unit - Always on 
Starting delay - Off 
Starting sequence - Off

FACTORY SETTINGS EVODRY 18H

Hygrostat (moisture content) - 60%
Fan operation - Fan mode 1

 

EVODRY 18H & 18P
HIGH/LOW

The dehumidifier can be run in capacity mode high or low via switch.

 

   

Need help choosing dehumidifier?

Feel free to use our guide to choose the product that suits your needs. Or contact us for more information.

General

Warranty:
AG20
CE:
Yes
BVB:
No
SundaHus:
Yes

Technical Data

Dehumidifier Type:
Desiccant
Operating Range (°C):
-20 - +40
Suitable up to (m3):
300 m3
Control Equipment:
Hygrostat
Control via app:
No
Wet Air Flow (m3/h):
45/25
Wet Air Exhaust Outlet (mm):
50
Dry Air Exhaust Outlet (mm):
125
Dry Air Flow (m3/h):
360/180
Capacity at 20°C/60% RF (l/24h):
16,8
Capacity up to (l/24h):
21,5
Noise Level (dBA):
61 dBA
Hygrostat Setting (%):
0 - 100
Output, Fan, nom (W):
83/18
Effect Usage dehumidification (W/h):
1140/680
Connection Voltage (V):
1x230V
Fuse (A):
10 A
IP Class:
IP21
Depth:
327 mm
Width (mm):
297 mm
Height (mm):
305 mm
Weight:
11.2 kg
Filter Class:
G4
Product Model:
EvoDry
Surface layer:
AluZink
Corrosion Class:
C4
Warranty:
AG20

Supplier

Supplier SKU:
20180

Freight

Country of origin:
SE
Customs Number:
8509 80 00

Brochures

Brochures

Manuals

Technical Documets

Technical Documents

Miscellaneous

  • Total: 7

Replacement products

PTC Element HRKK 18/22

1,782.50 SEK

Availability:

Wet gas hose 51x1500

590.00 SEK

Availability:

Processor Card EDH 1.0

688.75 SEK

Availability:

Controller Card EvoDry 4.0

1,341.25 SEK

Availability:

EvoDry outlet unit 6/12/18/24

625.00 SEK

Availability:

Availability:

Availability:

  • Total: 7
  • Total: 5

Replacement products

Availability:

Availability:

Availability:

Availability:

Upgrade kit EvoDry Display

3,823.75 SEK

Availability:

  • Total: 5