Swedish-made desiccant dehumidifier with large capacity
The EvoDry 24H dehumidifier is a powerful dehumidifier for slightly bigger spaces. All the dehumidifiers in the EvoDry range are designed with energy efficiency in mind. This is why they are some of the most energy-efficient dehumidifiers on the market.
For use in, for example, storage spaces, warehouses, cellars or holiday cabins with a room volume of up to 400 m³ .
Has a built-in electronic hygrostat, setting by graduated scale which is located by the intake filter. This control starts dehumidifying when the moisture level exceeds the set amount. Constant dehumidification is obtained by setting the dial to status ON. The dehumidifier’s fan is in operation as long as the plug is connected, only the dehumidification process is controlled by the hygrostat.
Unlike cooling or condensation dehumidifiers, desiccant dehumidifiers do not collect water in a container or a pipe, instead, the moisture goes away through an air stream. Acetec EvoDry 24H is a sorption dehumidifier that transports the moisture via a natural gas pipe.
Usage areas: storage spaces, cellars, garages, decontamination, holiday cabins
- Dehumidifier EvoDry 24H
- Natural gas pipe 1.5m
- Pipe clamp x2
- Outflow unit
What is the difference between dehumidifier EvoDry with control H or P?
H stands for Hygrostat and is suitable for dehumidification and remediation. You can say that the H models are universal and are suitable for most different dehumidification applications.
P stands for Panel and is suitable for dehumidification where you want an external monitoring of the climate and where the dehumidifier can alert if the climate is not good. For example, there may be creep bases and cold winds where you want extra control over the climate.
Features EvoDry 24H and 24P
Humid air to be dehumidified.
Moisture-saturated weak air flow that removes moisture from the dehumidified space.
Dry and slightly heated air that spreads in the dehumidified space.
H - Hygrostat
Has built-in electronic hygrostat, setting against graded scale is placed at intake filter. This control starts dehumidification when the moisture content exceeds the set value. Constant dehumidification is obtained by setting the knob to the ON position.
P - Panel
More advanced control for increased security where everyone settings are made via the control panel. With this control you have full control of the moisture content and temperature where alarms are shown on the panel if the climate is unfavorable. Several setting options with energy saving mode and service reminder (filter change).
Fan operation - Via switches on the circuit board different operating modes of the dehumidifier fan can be set.
The fan has three different operating modes:
FACTORY SETTINGS EVODRY 24P
Parameter 3 - 60%
FACTORY SETTINGS EVODRY 124H
Hygrostat (moisture content) - 60%
EVODRY 24H & 24P
The dehumidifier can be run in capacity mode high or low via switch.
Need help choosing dehumidifier?
|Operating range, °C||'-20 - +40|
|Suitable up to (m3)||400|
|Control via app||No|
|Wet air flow, m3/H||47/27|
|Wet air exhaust outlet, mm||50|
|Dry air flow, m3/hr||360/180|
|Dry air exhaust outlet, mm||125|
|Capacity, at 20°C/60%RF, l/24h||23,8|
|Capacity, max, l/24hrs||31|
|Noise level dB(A), 3 m distance||61/44|
|Hygrostat setting, %||0- 100|
|Output, fan, Nom, W||83/19|
|Power, during dehumidification, W||1730/1100|
|Supply voltage, V||1x230V|