Installation materials
Here you can find installation materials for Acetec EvoDry dehumidifiers, including protective guards, plastic sheeting, concrete cover mats, T-pieces, hoses, spiral duct elbows, clamps and other components for installation and adaptation. Choose the right materials based on the dehumidifier, the installation and the conditions of the space.
- Crawl space shield 300mm L1160Item ID: 201146Crawl space shield for interior renovation of the crawl space. Made of Magnelis.
- Crawl space shield 500mm L1160Item ID: 201147Crawl space shield for interior renovation of the crawl space. Made of Magnelis.
- Crawl space shield 700mm L1160Item ID: 201148Crawl space shield for interior renovation of the crawl space. Made of Magnelis.
- Plastic wrap 2700x0,2mm 25m/rlItem ID: 180054Plastic sheeting for covering ground and edge beam in crawl space.
- Concrete cover mat 2000x9x50mItem ID: 180052Concrete cover mat for crawl space insulation, approx. 100m².
- Nail washer 60x4 vitItem ID: 120049Nail washer for fastening plastic sheeting in crawl spaces.
- Metal nail plug 5x22Item ID: 120048Intended for mounting plasterboard studs, support rails, etc. to concrete. An excellent complement to drive pins.
- Concrete drill bit 5x110 SDS+Item ID: 800042
- Fogskum Dana 750mlItem ID: 1800531-component polyurethane foam, specially developed for use at temperatures down to –15°C. Binds and insulates excellently.
- Hose 102x15000mm whiteItem ID: 280031Flexible hose for distributing the dry air from the dehumidifier. The hose is made of white plastic with a steel spiral on the inside.
- Clamp 65-145 mm screwItem ID: 180061Clamp for hose. Fits hoses with a diameter between 65 and 145 mm.
- Spirorör 100mm 3mItem ID: 180111Spiral duct for installation of Acetec dehumidifiers EvoDry PD, PD+, PDX400, 6h and 6P.
- Flat spigot 80mmItem ID: 180011Flat duct connector 80 mm.
- Flat spigot 100mmItem ID: 180002
- Joining nipple 80 mm galvItem ID: 180046Joining nipple 80 mm galvanized for connecting ventilation ducts when installing Acetec dehumidifiers.
- Joining nipple 100 mm galvItem ID: 180047Joining nipple 100 mm galvanized for connecting ventilation ducts when installing Acetec dehumidifiers.
- Joining nipple 125 mm galvItem ID: 180148Joining nipple 125 mm galvanized for connecting ventilation ducts when installing Acetec dehumidifiers.
- T-pipe 100-100 GalvItem ID: 180044Galvanized T-pipe 100-100 for distributing spiro ducts during installation of Acetec dehumidifiers.
- T-pipe 125-125 GalvItem ID: 180147Galvanized T-pipe 125-125 for distributing spiro ducts during installation of Acetec dehumidifiers.
- Spiroböj 100mm 15grItem ID: 180112Spiro bend 100 mm 15° for installation of Acetec dehumidifiers EvoDry PD, PD+, PDX400, 6h and 6P.
- Mold-Free 20lItem ID: 400003Mold treatment for use in attics, crawl spaces, basements, bathrooms, walls, joist structures, etc.
- Spiroböj 100mm 30grItem ID: 180113Spiro bend 100 mm 30° for installation of Acetec dehumidifiers EvoDry PD, PD+, PDX400, 6h and 6P.
- Spiroböj 100mm 45grItem ID: 180114Spiro bend 100 mm 45° for installation of Acetec dehumidifiers EvoDry PD, PD+, PDX400, 6h and 6P.
- Spiroböj 100mm 90grItem ID: 180115Spiro bend 100 mm 90° for installation of Acetec dehumidifiers EvoDry PD, PD+, PDX400, 6h and 6P.
- Hose 51 VacuflexItem ID: 280037Hose suitable for dehumidifiers EvoDry 6, 12, 18 and 24. Sold per meter.
- Hose 63mmItem ID: 280002Wet gas hose suitable for dehumidifiers manufactured before 2014. Sold per meter.
- Hose 82x6000Item ID: 280009Hose for wet gas. PVC-coated fiberglass fabric with a fully embedded steel spiral.
- Hose 127x6000 mmItem ID: 280049Hose 127x6000 mm fits Acetec dehumidifiers EvoDry 12, 18 and 24.
- Konsol 400mm JirvaItem ID: 180116
- Circuit breaker 13AItem ID: 2061213A circuit breaker for installation of Acetec EvoDry PD dehumidifier.
- Diazed fuse 13AItem ID: 2061113A fuse for installation of Acetec dehumidifier EvoDry PD.
- Mold-Free 5lItem ID: 400002Mold treatment for use in attics, crawl spaces, basements, bathrooms, walls, joist structures, etc.
- Mold-Free 1lItem ID: 400001Mold treatment for use in attics, crawl spaces, basements, bathrooms, walls, joist structures, etc.
- Diazed Fuse 10AItem ID: 140013
- Diazed Fuse 16AItem ID: 140014
- Disposable Coverall AW 200 LItem ID: 800096Durable Disposable Coverall With High Comfort. Breathable Function On The Back Of The Coverall. Elastic In Hood, Legs And Cuffs For Secure Closure.
- Disposable Coverall AW 200 XLItem ID: 800108Durable Disposable Coverall With High Comfort. Breathable Function On The Back Of The Coverall. Elastic In Hood, Legs And Cuffs For Secure Closure.
- FFP2 Half Mask Filter MaskItem ID: 800097Filtering Half Mask That Protects Against Solid And Liquid Particles.


































