What is the dew point? Why condensation forms

The dew point is the temperature at which water vapour in the air begins to condense if the air is cooled without moisture being added or removed. If the dew point is 10 °C, condensation may form on a window, pipe or wall at 10 °C or below. Understanding the dew point helps you see why cold surfaces become damp and which measures actually reduce the risk of condensation.
What is the dew point, and why does condensation form?
Air almost always contains water vapour. When air cools, its relative humidity rises, even if the amount of water vapour stays the same. At the dew point, the air reaches saturation, equivalent to approximately 100% RH. If it cools further, excess water vapour can turn into liquid droplets.
This explains why condensation can form on the inside of a window on a cold morning. The air in the room does not need to be at 100% RH. It is enough for the air next to the glass to cool until it reaches its dew point. The same principle applies to cold water pipes, concrete floors and metal roofs.
The Swedish Meteorological and Hydrological Institute (SMHI) explains the relationship in its guide to different measures of humidity.
How do you calculate the dew point?
To estimate the dew point, you need to know the air temperature and relative humidity. Some digital hygrometers display the dew point directly. Otherwise, you can use a dew point table or a calculator that uses these two values.
Example: The air in a room is 15 °C with 70% RH. The dew point is then approximately 9.6 °C. If a pipe or windowpane has a surface temperature of 9 °C, condensation may form on it. If the surface is at 12 °C, it is warmer than the air's dew point, so condensation from that particular room air would not be expected.
To monitor conditions at home, read our guide on how to use a hygrometer. Remember that a hygrometer measures the air at the sensor, not the temperature of a cold wall or moisture within building materials.
Where do condensation problems occur?
The risk of condensation is greatest where humid air meets surfaces that are significantly colder than their surroundings. Common examples include:
- Windows and cold external walls: Indoor air can cool against glass and thermal bridges. Repeated moisture in the same spot is a reason to check the ventilation and building structure.
- Basements and crawl spaces: Warm, humid summer air may cool in spaces where the ground and foundation walls are still cool. Read more about moisture in crawl spaces.
- Bathrooms and laundry rooms: Showering and laundry add water vapour, which can condense on cold surfaces if the moisture is not removed.
- Storage rooms, garages and containers: Metal roofs and other surfaces can cool quickly. Our guide to moisture and condensation in containers provides more examples.
- Boats, motorhomes and holiday homes: Changes in weather and intermittent heating can create large differences between air and surface temperatures.
You do not have to see water droplets for a moisture problem to exist. Prolonged high humidity can also affect moisture-sensitive materials. If you notice recurring damp patches, odours or discolouration, investigate the cause. You can also read about signs of moisture damage.
How to reduce the risk of condensation
The right measure depends on why the surface becomes wet. Start by checking whether the moisture really is condensation or whether rainwater, a pipe or another source is leaking.
- Stop leaks and limit moisture sources. Repair water ingress and check whether wet clothing, laundry or other materials add too much moisture. A dehumidifier cannot replace a leak repair.
- Review ventilation. In living spaces, moisture from showers and cooking needs to be removed. But bringing in more outdoor air is not always appropriate in a cool crawl space or basement on humid summer days.
- Reduce cold surfaces where appropriate. Proper insulation and measures to address thermal bridges can raise surface temperatures. Avoid solutions that might conceal moisture within the structure.
- Distinguish heating from dehumidification. Heating air lowers RH if the moisture content remains unchanged, but it does not lower the dew point. Dehumidification removes water vapour and lowers the dew point.
- Consider a desiccant dehumidifier if problems persist. If a cold, moisture-prone space still has problems after the moisture sources have been addressed, a desiccant dehumidifier may be an option. The right solution depends on temperature, moisture load, airflow and the building's characteristics. The aim is not to achieve the lowest possible RH, but to reduce moisture exposure without creating new problems.
- Monitor conditions over time. Measure temperature and RH as the weather changes and check whether condensation returns. If hidden moisture or mould damage is suspected, a professional investigation may be needed.
