Dehumidifier EvoDry 6H 2.0

EvoDry 6H 2.0 is a compact desiccant dehumidifier for spaces where moisture needs to be kept under control – even where there is no heating for part of the year. It is suitable for boats, caravans, motorhomes, holiday homes, storerooms, garages, sheds, warehouses, cold stores, containers, covered trailers, basements and tack rooms.

The dehumidifier is developed by Acetec in Älvsbyn and builds on many years of experience in dehumidification and moisture control. Our knowledge of dehumidification solutions for different buildings, spaces and applications is the foundation for a compact and robust design that is easy to position and built for reliable operation, even in spaces that are unheated for periods of time.

Suitable for many smaller spaces

The model is a good choice when you want to prevent excessive humidity in a smaller space that is not always heated or regularly used. The built-in hygrostat starts dehumidification automatically when humidity exceeds the set value.

This makes it particularly practical for leisure vehicles, boats, storerooms, holiday homes and containers, where you want to leave the dehumidifier installed and let it work as needed.

For high-risk structures such as crawl spaces, we instead recommend a desiccant dehumidifier with higher capacity and a control panel for more comprehensive control. Models such as EvoDry RCF 12 or EvoDry RCF 20 are designed for this type of installation.

Desiccant dehumidification – moisture is led out of the space

Unlike a refrigerant or condensation dehumidifier, the model does not collect water in a container that needs emptying. Instead, the moisture is bound and carried away as humid air through the supplied wet air hose.

At the same time, dry and slightly warmed air is returned to the space. This keeps humidity at a controlled level without the need for a water container.

Easy installation and automatic control

The compact design makes the dehumidifier easy to install and use. The built-in electronic hygrostat controls dehumidification according to the set humidity. For continuous dehumidification, the hygrostat can be set to ON.

Accessories such as wall brackets, hose kits and a process air spigot are available to adapt the installation. With a hose kit and process air spigot, the dehumidifier can be placed in a different space from the one being dehumidified – practical when space is tight or when you want the dehumidifier to be easily accessible.

The fan can also be set to three different operating modes, so its function can be adapted to how the space is used. Because the dehumidifier only runs when needed, energy consumption and operating costs are kept low.

Included

• 1 × Acetec EvoDry 6H 2.0
• 1 × 1.5 metre wet air hose
• 1 × outlet unit

What does the H in 6H 2.0 stand for?

H stands for hygrostat.

The built-in electronic hygrostat automatically starts dehumidification when humidity exceeds the set value. This makes the H version a flexible model that suits many different dehumidification needs.

Functions 6H 2.0

	Process air The humid air drawn into the dehumidifier. Wet air The moisture-laden air stream that carries the moisture out of the space through the wet air hose. Dry air Dry, slightly warmed air returned to the space.
H – Hygrostat The built-in electronic hygrostat is set using the graduated scale next to the intake filter. Dehumidification starts when humidity exceeds the set value. For continuous dehumidification, turn the knob to ON.
Fan operation Using a switch on the circuit board, the fan can be set to three operating modes: Continuous operation of the process air fan. The fan stops when humidity falls below the set value. Every four hours the fan starts and runs for 15 minutes to check the humidity. The fan stops when humidity falls below the set value. Every twelve hours the fan starts and runs for 3 minutes to check the humidity.	Factory settings Hygrostat (humidity): 60% Fan operation: Fan mode 1