Dehumidifier EvoDry RCF 12 G2
Item ID:20025
EAN: 7350070012940
EvoDry RCF 12 G2 is a dehumidifier that effectively manages moisture in spaces such as cold attics, crawl spaces and garages.
Acetec EvoDry RCF 12 G2 is a powerful desiccant dehumidifier for humidity control in spaces up to 200 m³. With a dehumidification capacity of up to 12 litres per day, it is particularly well suited to crawl spaces and cold attics, but also to basements, garages and storage rooms.
The RCF 12 G2 builds on the proven RCF 12 platform and features several design and internal improvements that increase operational reliability, including a new chassis, a new wet air section and a new handle. The basic principle and the proven function remain unchanged.
The dehumidifier is developed and manufactured by Acetec in Älvsbyn, Sweden, and draws on long experience in dehumidification and moisture management. An external control panel is included as standard, and a range of installation accessories provides great flexibility in air distribution and placement. The EvoDry RCF 12 G2 comes with a 3-year warranty.
For crawl spaces, cold attics and other damp-prone spaces
The EvoDry RCF 12 G2 is designed for spaces where humidity levels can vary throughout the year and where continuous control is important. In crawl spaces and cold attics, temperature and relative humidity can change quickly with the seasons and the weather, which calls for demand-controlled operation.
The model is also well suited to basements, garages and storage rooms. By keeping humidity at a controlled level, the dehumidifier helps reduce the risk of damp odours, condensation and mould growth.
Desiccant dehumidification – effective even at low temperatures
The EvoDry RCF 12 G2 works on the desiccant principle. Humid air is drawn into the dehumidifier and passes through a desiccant rotor that absorbs the moisture. The moisture is then carried out of the space via a separate wet air stream.
Unlike a refrigerant dehumidifier, there is no water tank to empty. Desiccant technology also works well at low temperatures, making the model well suited to crawl spaces, cold attics and other unheated spaces.
Reliable design
The EvoDry RCF 12 G2 is built for long-term operation with minimal maintenance. The fan is enclosed, and the design reduces the load on the rotor and rotor motor. This provides high operational reliability and a long service life, and keeps service costs down over time.
Flexible installation with a range of accessories
The EvoDry RCF 12 G2 has one dry air connection as standard. With the accessory dry air spigot RCF 3 × 100 mm, up to three dry air hoses can be connected, so that the dry air can be distributed to several parts of, for example, a crawl space or cold attic.
The process air inlet can be ducted using a process air spigot for 1 × 125 mm or 3 × 100 mm hose. By ducting the process air and returning the dry air, the dehumidifier can, in suitable installations, be placed in an adjacent space, for example for easier access during inspection and service.
A ceiling/wall bracket is also available as an accessory for placement where floor placement is not suitable.
Dimensional drawing EvoDry RCF 12 G2

What's included
- 1 x Acetec EvoDry RCF 12 G2
- 1 x control panel
- 1 x modular cable, 15 metres – for connecting the control panel
- 1 x wet air hose, 2 metres – carries the humid air out
- 1 x outlet unit – for the wet air outlet through a wall
Dry air spigot, process air spigot, ceiling/wall bracket, hoses and other installation material are not included. See installation material and accessories.
Saves energy by following the mould risk
A dehumidifier with a standard hygrostat works towards a fixed value, for example 70% RH, regardless of temperature. It then dehumidifies just as much in a cold crawl space in November, when the risk of mould is low, as in a warm crawl space in August, when the risk is at its highest.
In energy-saving mode, humidity control mode RH + temp, the EvoDry RCF 12 G2 takes both humidity and temperature into account, following the same principle as the mould index. The set humidity value applies at +15 °C. For each degree colder, the relative humidity is allowed to rise by 1 percentage point, down to 0 °C. The dehumidifier therefore works when the mould risk requires it and saves energy when it does not.
Example with a set humidity value of 70% RH:
| Temperature in the space | Dehumidifier starts at |
|---|---|
| +15 °C or warmer | 70% RH |
| +10 °C | 75% RH |
| +5 °C | 80% RH |
| 0 °C | 85% RH |
The humidity control mode is selected on the control panel. On delivery, the dehumidifier is set to RH mode, in which it works towards the set value without temperature compensation.
Control panel with climate alarm

The external control panel shows current humidity, temperature and operating status, lets you adjust settings and reminds you about service and filter replacement. This provides good control even when the dehumidifier is placed in a hard-to-reach location. The panel also raises an alarm if the humidity has remained above the alarm limit for the set number of days, so that you quickly know if action is needed.
Verified environmental data with EPD
The EvoDry RCF 12 G2 is covered by a third-party verified Environmental Product Declaration, EPD, in accordance with ISO 14025 and EN 15804+A2, published in the International EPD System. It provides product-specific environmental data that can be used in climate declarations, environmental certifications and procurement instead of generic default values.
Read more about our EPDs for dehumidifiers.
Capacity chart

Technical overview

Air flows
- Process air The humid air drawn into the dehumidifier. With the process air spigot accessory, the inlet can be ducted with one or more hoses.
- Wet air The moisture-saturated air stream that carries the moisture out of the space.
- Dry air Dry, slightly warmed air that is returned to the space. With the dry air spigot 3 × 100 mm, the dry air can be distributed via up to three hoses.

External control panel
Included as standard and provides access to the dehumidifier's most important settings and operating information, energy-saving mode (RH + temp) and reminders for service and filter replacement.
Fan speed
The fan speed is fixed.
Factory settings
- LanguageSwedish
- Maintenance/service180 days
- Humidity setting60%
- Fan operationFan mode 1
- Humidity control modeRH
- Fan control modeConstantly on
- Start delayOff
- Start sequenceOff
- Dry air spigot RCF 3x100mmItem ID: 20625Dry air spigot 3x100 RCF suitable for dehumidifier EvoDry RCF 12.
- Filter RCF12/20 3-PackItem ID: 205123-pack filters suitable for Acetec dehumidifiers RCF 12 and 20.
- Hose kit EvoDry RCF 12/ED12/18/24Item ID: 20616Hose kit that fits EvoDry RCF 12, 12, 18 and 24. Hose kit containing hoses and hose clamps. The kit provides better distribution of the dehumidified air so that humidity is lowered faster in the space.
- Process air spigot RCF 1x125mmItem ID: 20627Process air spigot makes it possible to connect a hose to the suction side of Acetec dehumidifier EvoDry RCF 12 and RCF 20.
- Process air spigot RCF 3x100mmItem ID: 20628Process air spigot makes it possible to connect hoses to the suction side of Acetec dehumidifier EvoDry RCF 12 and RCF 20.
- Bottom board EvoDry 4.0Item ID: 240001Baseboard suitable for dehumidifiers with EvoDry 4.0 control system .
- Clamp 65-145 mm screwItem ID: 180061Clamp for hose. Fits hoses with a diameter between 65 and 145 mm.
- Control panel MPO-01 AvfuktarItem ID: 340159Control panel suitable for Acetec dehumidifiers with EDC control equipment from version 1.2.0 onward.
- Fan PD VBH0190R2MCZItem ID: 250018
- Filter RCF12/20 20-PackItem ID: 2051320-pack filters suitable for Acetec dehumidifiers RCF 12 and 20.
- Filter RCF12/20 3-PackItem ID: 205123-pack filters suitable for Acetec dehumidifiers RCF 12 and 20.
- Modular cable 15mItem ID: 140000Modular cable 15 meters. Fits all our dehumidifiers and ventilation units with modular connector.
- Outlet unit EvoDry 80 mmItem ID: 299074Outlet unit with an 80 mm spigot for Acetec EvoDry RCF, EvoDry PD and EvoDry RD dehumidifiers.
- Processor board EDP 2.0Item ID: 240044
- PTC-Element B46-148-3 230VItem ID: 110000PTC-type heating coil. When replacing the heating coil, we recommend replacing all elements in the product. Always disconnect the power when working on your dehumidifier or unit.
- Rotor motor RCFItem ID: 299115
- Tension rollerItem ID: 301199
- Timing beltItem ID: 240041
- Timing beltskivaItem ID: 240040
- Wet air hose 82x2000Item ID: 282021Wet air hose suitable for EvoDry PD, PD+, PDX400 and RD dehumidifiers.
- Warranty
- AG20DDU
- CE
- Yes
- Dehumidifier Type
- Desiccant
- Operating Range (°C)
- -20 - +40
- Suitable up to (m³)
- 200
- Control Equipment
- EDC-01
- Wet Air Flow (m³/h)
- 30
- Dry Air Exhaust Outlet (mm)
- 80
- Dry Air Exhaust Outlet (mm)
- 125
- Dry Air Flow (m³/h)
- 200
- Capacity at 20°C/60% RF (l/24h)
- 12
- Capacity up to (l/24h)
- 12
- Sound Level (dBA)
- 58
- Hygrostat Setting (%)
- 20 - 80
- Output, Fan, nom (W)
- 55
- Effect Usage dehumidification (W/h)
- 665
- Connection Voltage (V)
- 1x230V
- Fuse (A)
- 10
- IP rating
- IP21
- Depth (mm)
- 405
- Width (mm)
- 375
- Height (mm)
- 255
- Weight (kg)
- 13,4
- Filter Class
- G4
- Surface/Material
- Zn-Al-Mg-coated steel
- Corrosion class
- C5





























