Dehumidifier EvoDry RCF 20 G2
Item ID:20030
EAN: 7350070012957
EvoDry RCF 20 G2 is a dehumidifier that effectively manages moisture in spaces such as cold attics, crawl spaces and garages.
Acetec EvoDry RCF 20 G2 is a powerful desiccant dehumidifier for humidity control in spaces up to 300 m³. With a dehumidification capacity of up to 17.5 litres per day, it is particularly well suited to larger or more demanding spaces such as crawl spaces, cold attics, basements, garages and storage rooms.
The RCF 20 G2 builds on the proven RCF 20 platform and features several design and internal improvements that increase operational reliability, including a new chassis, a new wet air section and a new handle. The basic principle and the proven function remain unchanged.
The dehumidifier is developed and manufactured by Acetec in Älvsbyn, Sweden, and draws on long experience in dehumidification and moisture management. An external control panel is included as standard, and three dry air spigots together with a range of installation accessories provide great flexibility in air distribution and placement.
For larger and more demanding spaces
The EvoDry RCF 20 G2 is designed for spaces where the moisture load can be high or vary throughout the year. In crawl spaces and cold attics, temperature and relative humidity can change quickly with the seasons and the weather, which places demands on both capacity and demand-controlled operation.
The model is also well suited to larger basements, garages and storage rooms. By keeping humidity at a controlled level, the dehumidifier helps reduce the risk of damp odours, condensation and mould growth.
Desiccant dehumidification – effective even at low temperatures
The EvoDry RCF 20 G2 works on the desiccant principle. Humid air is drawn into the dehumidifier and passes through a desiccant rotor that absorbs the moisture. The moisture is then carried out of the space via a separate wet air stream.
Unlike a refrigerant dehumidifier, there is no water tank to empty. Desiccant technology also works well at low temperatures, making the model well suited to crawl spaces, cold attics and other unheated spaces.
Reliable design
The EvoDry RCF 20 G2 is built for long-term operation with minimal maintenance. The fan is enclosed, and the design reduces the load on the rotor and rotor motor. This provides high operational reliability and a long service life, and keeps service costs down over time.
Flexible installation with three dry air spigots
The EvoDry RCF 20 G2 has three dry air spigots for 100 mm hose. With hoses connected directly to the dehumidifier, the dry air can be distributed to several parts of, for example, a larger or divided crawl space.

Please note: Spigot 2 has a lower airflow than spigots 3 and 4. Connect the shortest dry air hose to spigot 2 for a more balanced air distribution.
The process air inlet can be ducted if required using a process air spigot. A ceiling/wall bracket is also available as an accessory for placement where floor placement is not suitable.
Dimensional drawing EvoDry RCF 20 G2

What's included
- 1 x Acetec EvoDry RCF 20 G2
- 1 x control panel MPO-01
- 1 x modular cable, 15 metres – for connecting the control panel
- 1 x wet air hose, 2 metres – carries the humid air out
- 1 x outlet unit – for the wet air outlet through a wall
Dry air hoses, process air spigot, ceiling/wall bracket and other installation material are not included. See installation material and accessories.
Saves energy by following the mould risk
A dehumidifier with a standard hygrostat works towards a fixed value, for example 70% RH, regardless of temperature. It then dehumidifies just as much in a cold crawl space in November, when the risk of mould is low, as in a warm crawl space in August, when the risk is at its highest.
In energy-saving mode, humidity control mode RH + temp, the EvoDry RCF 20 G2 takes both humidity and temperature into account, following the same principle as the mould index. The set humidity value applies at +15 °C. For each degree colder, the relative humidity is allowed to rise by 1 percentage point, down to 0 °C. The dehumidifier therefore works when the mould risk requires it and saves energy when it does not.
Example with a set humidity value of 70% RH:
| Temperature in the space | Dehumidifier starts at |
|---|---|
| +15 °C or warmer | 70% RH |
| +10 °C | 75% RH |
| +5 °C | 80% RH |
| 0 °C | 85% RH |
The humidity control mode is selected on the control panel. On delivery, the dehumidifier is set to RH mode, in which it works towards the set value without temperature compensation.
Control panel with climate alarm

The external control panel shows current humidity, temperature and operating status, lets you adjust settings and reminds you about service and filter replacement. The panel also raises an alarm if the humidity has remained above the alarm limit for the set number of days, so that you quickly know if action is needed.
Verified environmental data with EPD
The EvoDry RCF 20 G2 is covered by a third-party verified Environmental Product Declaration, EPD, in accordance with ISO 14025 and EN 15804+A2, published in the International EPD System. It provides product-specific environmental data that can be used in climate declarations, environmental certifications and procurement instead of generic default values.
Read more about our EPDs for dehumidifiers.
Capacity chart

Technical overview

Air flows
- Process air The humid air drawn into the dehumidifier. With the process air spigot accessory, the inlet can be ducted.
- Wet air The moisture-saturated air stream that carries the moisture out of the space.
- Dry air Dry, slightly warmed air that is returned to the space via up to three hoses.

External control panel
Included as standard and provides access to the dehumidifier's most important settings and operating information, energy-saving mode (RH + temp) and reminders for service and filter replacement.

Fan speed
The fan speed can be set to high or low via a switch.
Factory settings
- LanguageSwedish
- Maintenance/service180 days
- Humidity setting60%
- Humidity control modeRH
- Fan control modeConstantly on
- Start delayOff
- Start sequenceOff
- Circuit breaker 13AItem ID: 2061213A circuit breaker for installation of Acetec EvoDry PD dehumidifier.
- Dry air spigot RCF 1x125mmItem ID: 20626Dry air spigot 1x125 RCF suitable for dehumidifier EvoDry RCF 20.
- Hose kit EvoDry RCF 20/PD/RDItem ID: 20600Hose kit that fits EvoDry PD, EvoDry RD and EvoDry RCF 20. Hose kit containing hoses and hose clamps. The kit provides better distribution of the dehumidified air so that humidity is lowered faster in the space.
- Process air spigot RCF 1x125mmItem ID: 20627Process air spigot makes it possible to connect a hose to the suction side of Acetec dehumidifier EvoDry RCF 12 and RCF 20.
- Process air spigot RCF 3x100mmItem ID: 20628Process air spigot makes it possible to connect hoses to the suction side of Acetec dehumidifier EvoDry RCF 12 and RCF 20.
- Bottom board EvoDry 4.0Item ID: 240001Baseboard suitable for dehumidifiers with EvoDry 4.0 control system .
- Clamp 65-145 mm screwItem ID: 180061Clamp for hose. Fits hoses with a diameter between 65 and 145 mm.
- Control panel MPO-01 AvfuktarItem ID: 340159Control panel suitable for Acetec dehumidifiers with EDC control equipment from version 1.2.0 onward.
- Fan PD VBH0190R2MCZItem ID: 250018
- Filter RCF12/20 20-PackItem ID: 2051320-pack filters suitable for Acetec dehumidifiers RCF 12 and 20.
- Filter RCF12/20 3-PackItem ID: 205123-pack filters suitable for Acetec dehumidifiers RCF 12 and 20.
- Modular cable 15mItem ID: 140000Modular cable 15 meters. Fits all our dehumidifiers and ventilation units with modular connector.
- Outlet unit EvoDry 80 mmItem ID: 299074Outlet unit with an 80 mm spigot for Acetec EvoDry RCF, EvoDry PD and EvoDry RD dehumidifiers.
- Processor board EDP 2.0Item ID: 240044
- PTC-Element B46-148-3 230VItem ID: 110000PTC-type heating coil. When replacing the heating coil, we recommend replacing all elements in the product. Always disconnect the power when working on your dehumidifier or unit.
- Rotor motor RCFItem ID: 299115
- Tension rollerItem ID: 301199
- Timing beltItem ID: 240041
- Timing beltskivaItem ID: 240040
- Wet air hose 82x2000Item ID: 282021Wet air hose suitable for EvoDry PD, PD+, PDX400 and RD dehumidifiers.
- Warranty
- AG20DDU
- CE
- Yes
- Dehumidifier Type
- Desiccant
- Operating Range (°C)
- -20 - +40
- Suitable up to (m³)
- 300
- Control Equipment
- EDC-01
- Wet Air Flow (m³/h)
- 27/42
- Dry Air Exhaust Outlet (mm)
- 80mm
- Dry Air Exhaust Outlet (mm)
- 3x100mm
- Dry Air Flow (m³/h)
- 247/295
- Capacity at 20°C/60% RF (l/24h)
- 17,5
- Capacity up to (l/24h)
- 17,5
- Sound Level at Half Speed (dBA)
- 48
- Sound Level (dBA)
- 56
- Hygrostat Setting (%)
- 20 - 80
- Output, Fan, nom (W)
- 88
- Effect Usage dehumidification (W/h)
- 900
- Connection Voltage (V)
- 1x230V
- Fuse (A)
- 10
- IP rating
- IP21
- Depth (mm)
- 405
- Width (mm)
- 375
- Height (mm)
- 255
- Weight (kg)
- 13,2
- Filter Class
- G4
- Surface/Material
- Zn-Al-Mg-coated steel
- Corrosion class
- C5
































