EvoAir A85CS G1 Air Handling Unit

EvoAir A85CS G1 is a compact heat recovery ventilation (MVHR) unit for homes and smaller premises such as offices, and a further development of the A50CS in the CS series. With a height of just 300 mm, the unit is designed for installation in ceiling voids and suspended ceilings. Compared with the previous generation, A85CS G1 delivers higher airflow and a lower SFP (specific fan power). The connections can be configured for right-hand or left-hand installation. The unit is manufactured in Älvsbyn, Sweden, is developed for the Nordic climate and is Eurovent-certified.

Low height for ceiling installation

The 300 mm height allows installation in confined spaces, for example above a dropped ceiling in a hallway or corridor, in a suspended ceiling or above a walk-in wardrobe. This makes the unit well suited to flats, terraced houses without loft space, premises without a plant room, and renovation projects where the installation should not take up floor space.

The unit can be mounted on the ceiling or on the floor. The inspection hatch provides access for servicing and filter changes.

Design and connections

The unit has four Ø160 mm duct connections located on its short sides. They can be configured for right-hand or left-hand installation, so the same unit suits the conditions and ductwork of each installation. New compared with the previous generation are the vibration-isolated suspension, which limits the transmission of vibrations and structure-borne noise to the floor structure when ceiling-mounted, and the white-painted cover.

The unit has a cooker hood connection on its long side, allowing kitchen extract to be integrated into the home’s ventilation system.

Heat recovery and energy performance

EvoAir A85CS G1 is equipped with built-in filters, a rotary heat exchanger and EC fans. Together with robust components, the higher airflow and lower SFP compared with the previous generation result in low running costs over time.

Combined with the EvoControl control system, the unit forms a complete ventilation solution, allowing operation to be adjusted and monitored as needed.

EvoControl MPO

MPO-01 is a control panel with a plain-text display for managing the unit’s functions. The system connects to the network via cable, and the EvoCloud cloud service is included as standard. With EvoCloud, the unit can be controlled and monitored remotely from a smartphone, tablet or computer, with access to operating status, measurements and history.

With support for Modbus TCP, the unit can be integrated into a higher-level control or building management system (BMS).

Features

• EvoCloud for cloud-based control and monitoring
• Remote management via smartphone, tablet or computer
• Timer and scheduling
• Pressure control
• Air quality control
• Humidity control
• Logging of measurements and history
• Plain-text display and parameter settings
• System flow diagram
• Modbus TCP support

Some features may require accessories.